G Force RCAE-4 Transmission Crossmember, 1964-72 A-Body, GM-4

Description

Specifically designed to fit the 1964-72 A-Body, Centerline of holes are 53.625" apart and it is 54 3/4" in total length, It bolts directly to the frame rail and utilizes the factory frame holes, This crossmember is installed with the GForce label facing the REAR of the vehicle, Designed to accommodate your all of your transmission needs and provides clearance for large diameter aftermarket dual exhaust systems
G Force RCAE-4 Transmission Crossmember, 1964-72 A-Body, GM-4
Sku # 64064723
Mfr. Part # RCAE-4
Condition
New
Brand
G Force Crossmembers
Sold
Each
Details
Info
G Force Performance is the premiere source for transmission crossmembers. Whether you're looking for an upgrade from stock components or parts crossmember to accommodate your all of your transmission needs and provides clearance for large diameter aftermarket dual exhaust systems. Finished in a black powder coat and includes new mounting hardware.
Note: 1968-72 hardtops distance between crossmember frame holes is approximately 53-5/8". Measure your frame or crossmember to insure proper selection
Also fits 1968-1972 GM A-Body with 4L80E and 4L85E transmissions
Mounting hardware included
This crossmember is installed with the GForce label facing the REAR of the vehicle.
Some vehicles of this generation are equipped with a crossmember that bolts directly to the vehicles frame rail, while others are equipped with a crossmember that utilizes a tab that sets on the frame rail and is then clamped by a steel cap that is embedded with a rubber liner. The RCAE crossmember bolts directly to the frame rail and utilizes the factory frame holes. To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails with a 1/2" drill. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtain Grade 8 fasteners and washers to compensate.
Application
This Part Fits
Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember.
This Crossmember fits the GM-4 Transmission Group:
Hydra-Matic 4L80 transmission
Hydra-Matic 4L80-E transmission
Hydra-Matic 4L85 transmission
Hydra-Matic 4L85-E transmission
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Powder Coated
MFG. Part #
RCAE-4
Centerline of Holes
53.625
Notes
Please note that G-Force crossmembers do not include the G-Force logo sticker as shown in the picture. This decal is shown for brand reference only.
Reviews
Built like a tank and fit my 1966 Chevelle perfect
Rated
by Brian P on June 16, 2021
Summary:
This thing is solid and built like a tank. I have a 1966 Chevelle with a 502 Big Block, Hedman headers connected to 2.5 inch exhaust and a 4L80e and this is perfect. Great price, easy install and good quality. Will buy same one for all future builds.
Cons:
None
Pros:
Cutouts for exhaust
Fits 1966 Chevelle
Solid
Thick
Yes, I recommend this product.
Great product and will buy same for next project.
Rated
by Tom on October 20, 2020
Summary:
Fits and functions as needed. Would be better to have a little more durable finish as I scratched it.
Pros:
Designed great. Fits great. Works as it should.
Yes, I recommend this product.
Install was easy!
Rated
by Killa Cam on July 22, 2020
Summary:
Good product! i feel this is going to my take my 6.0/4l80e swap to the next level! had no issues with installing on a 70' Chevelle!
Yes, I recommend this product.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.